How to set water mixer shower

How to Set Up a Water Mixer Shower: A Step-by-Step Guide

A water mixer shower, also known as a thermostatic mixer shower, is a type of shower system that combines hot and cold water to produce a consistent, comfortable temperature. It’s a popular choice for many homeowners due to its reliability, safety, and water-saving features. In this article, we’ll walk you through the process of setting up a water mixer shower, from preparation to installation and testing.

Preparation

Before starting the installation process, make sure you have the following materials and tools ready:

• A water mixer shower kit (available at most hardware stores or online)
• A water supply line ( získ of 1/2 inch or 1 cm)
• Teflon tape
• Adjustable wrench or basin wrench
• Pliers
• A level
• A drain trap (if your shower has a separate drain)

Step 1: Prepare the Shower Area

Before starting the installation, clear the shower area of any debris, clothes, or other obstructions. This will give you a clean and unobstructed space to work in. Take note of the shower’s water supply lines, valves, and any other features that may affect the installation.

Step 2: Locate the Water Supply Lines

Identify the water supply lines that connect to the shower’s existing faucet. You’ll need to locate the hot and cold water supply lines, which are usually color-coded (hot = red, cold = blue). Make a note of the locations of these lines, as you’ll need to connect the water mixer shower to them later.

Step 3: Install the Water Mixer Shower

Unpack the water mixer shower kit and lay out the components according to the manufacturer’s instructions. Typically, the kit will include the following parts:

• The control unit (the main device that mixes the water)
• A diverter valve (combines hot and cold water)
• A mixing chamber (where the water is mixed)
• A showerhead (optional)

Attach the control unit to the shower wall using the provided nuts and washers. Make sure it’s level and secure.

Step 4: Connect the Water Supply Lines

Use Teflon tape to thread the water supply lines through the holes in the control unit. Secure the lines with nuts and washers, ensuring a tight seal.

Step 5: Connect the Diverter Valve

Attach the diverter valve to the control unit, making sure it’s securely locked in place.

Step 6: Connect the Mixing Chamber

Attach the mixing chamber to the control unit, ensuring it’s properly seated and secured.

Step 7: Install the Showerhead (Optional)

If your water mixer shower kit includes a showerhead, attach it to the showerhead assembly (usually provided). Make sure it’s securely fastened and properly aligned.

Step 8: Connect the Drain Trap (If Applicable)

If your shower has a separate drain, attach the drain trap to the showerhead assembly, following the manufacturer’s instructions.

Step 9: Test the Installation

Turn on the water supply and test the shower to ensure proper function. Check for leaks, water pressure, and temperature adjustments.

Tips and Safety Considerations

• Always turn off the water supply lines before starting the installation to avoid water damage or safety hazards.
• Use NEUF tape to ensure secure connections and prevent leaks.
• Check the manufacturer’s instructions for specific installation requirements and recommendations.
• Ensure all connections are made according to local plumbing codes and regulations.

By following these steps, you should be able to successfully set up a water mixer shower. Remember to test the installation thoroughly to ensure optimal performance and safety. Happy DIY-ing!