How do I remove these little screws under the GoPro (I want to replace the mount)?

"How to Remove Small Screws Under Your GoPro: A Step-by-Step Guide to Replacing the Mount"

Are you experiencing difficulties in removing the small screws under your GoPro, hindering your ability to replace the mount and upgrade your camera’s functionality? You’re not alone! Many GoPro users encounter this frustrating problem, but fear not, as we’re here to guide you through a step-by-step process to help you successfully remove these tiny screws and replace the mount.

CAUTION: Be patient and gentle when handling the screws, as they can be easily damaged or lost.

Step 1: Prepare Your Workspace

Before you start, make sure your workspace is well-lit and clean. Place your GoPro upside down on a flat surface, with the screws facing up. This will make it easier to access and handle the small screws.

Step 2: Identify the Screws

Locate the small screws under your GoPro, which are usually made of Torx (T4 or T6) or Phillips-style (PH2 or PH0) heads. Take note of the type of screw you need to remove, as it might be necessary to use the correct screwdriver or bit.

Step 3: Choose the Right Tool

Acquire a Torx (or Phillips) screwdriver or bit, specifically designed for working with small screws. You can find these at most hardware stores or online. If you don’t have a suitable screwdriver, consider using a pair of needle-nosed pliers or a watch winder to help grip the screw head.

Step 4: Remove the Screws

Place the screwdriver or bit into the screw head and gently pry it out. Be cautious to avoid applying too much pressure, which might damage the surrounding material or strip the screw head. You may need to rock the screwdriver or bit back and forth to loosen the screw.

Step 5: Remove the Mount

Once the screw is removed, you should be able to lift the mount off the GoPro’s body. Be gentle, so as not to scratch the camera or damage the mount.

Step 6: Install the New Mount

Insert the new mount onto the GoPro’s body and secure it with the same screws you removed. Make sure they’re tightened firmly, but not overtightened, to ensure a secure fit.

Tips and Precautions

• If you encounter resistance while removing the screw, you may need to use a bit more force or try wiggling the screwdriver back and forth.
• Take care not to touch any internal components or electronics within the GoPro.
• Handle the removed screws with care, as they can be difficult to replace if lost or damaged.
• If you’re not comfortable with this process, consider consulting the official GoPro documentation or seeking assistance from a professional repair service.

With these steps, you should be able to successfully remove the small screws under your GoPro and replace the mount. Remember to be patient, gentle, and careful throughout the process to avoid damage to your camera or the new mount. Happy upgrading!