How do I get the back off this type of sticker?

sugarmamatoes
4 Min Read
How do I get the back off this type of sticker?
13 Comments
Subscribe
Notify of
13 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments

Peel it

Try a piece of tape to grab onto the backing. 

One piece of tape on one side, leaving a tab over the edge, another piece nearby on the other side in the same manner, then pull pieces of tape apart.

I have a bunch and it’s tough! An exacto knife sort of works, but I had the best luck with freshly cut nails.

You guys crack me up ‘just peel it’! I am getting too much brain damage trying to separate the two pieces of plastic and thought that there HAS to be a better way. I’ll try the two pieces of tape method. Thanks for your help!

Is it not two layers, the stiff backing that peels off and the flexible sticker itself with the embedded pattern holding it all together?

Maybe a clean sharp knife point or corner of a razor. Assuming the sticker is the full size of the plastic, and you just need to get the thing to start separating. So just carefully poking right on the edge, then gently turning the blade sideways to start the separation of the sticker from the backer once you get it in between the two.

Am I the only person to think that it does not come apart?

Some very delicate stickers will have a backing that’s basically part of the sticker now, and will not come apart. It isn’t designed to come apart, as the sticker lines are so thin and fragile that most of them will end up disintegrating if not for the backing.

My guess is, if it’s sticky already (the way you’re holding it), the backing does not come apart.

Carefully

Like any other sticker?

Just like any sticker. Peel it off

Try playing with the balls to get it off

Rubbing alcohol

How to Remove Stickers with Residue: A Step-by-Step Guide

Have you ever tried to remove a sticker from a surface only to be left with a stubborn residue? This frustrating phenomenon is all too common, especially when it comes to stickers with acrylic adhesive, such as die-cut stickers, decals, and labels. But don’t worry, we’re here to help you break free from the grip of those pesky stickers!

In this article, we’ll provide you with a step-by-step guide on how to remove stickers with residue, including the type of stickers commonly found on electronics, laptops, cars, and more.

Before You Start

Before attempting to remove a sticker, make sure you follow these simple precautions:

  1. Clean the area: Ensure the surface where the sticker is attached is free from dirt, grime, and oils, which can interfere with the removal process.
  2. Use the right tools: You’ll need some basic tools, such as a credit card, scraper, or a specialized adhesive remover.
  3. Test a small area first: Before applying any solvents or using a scraping tool, test a small, inconspicuous area to ensure you won’t damage the surface.

Method 1: Cold Method (No Solvents)

For sticker removal without solvents, follow these steps:

  1. Apply heat: Place a warm cloth or a hair dryer on low setting over the sticker to loosen the adhesive. Avoid using high heat, which can damage the surface.
  2. Use a credit card or scraper: Carefully insert a credit card or scraper between the sticker and the surface. Gently pry the sticker, working from one side to the other. Don’t apply too much pressure, as this can tear the surface.
  3. Repeat if necessary: Continue to apply heat and scrape until the sticker comes off.

Method 2: Solvent-Based Method

For stickers that resist removal with the cold method, you can use a solvent-based approach:

  1. Choose the right solvent: Select a solvent-based adhesive remover or a solution of equal parts water and white vinegar.
  2. Apply the solvent: Dampen a cloth with the solvent and apply it to the sticker. Let it sit for 5-10 minutes to allow the adhesive to break down.
  3. Scrape and peel: Use a credit card or scraper to gently peel and scrape off the sticker, working from one side to the other.
  4. Wipe away residue: Use a lint-free cloth or paper towel to wipe away any remaining adhesive residue.

Tips and Tricks

  • Avoid using harsh chemicals, such as nail polish remover, as they can damage certain surfaces.
  • For delicate or sensitive surfaces, it’s best to use a credit card or scraper without applying too much pressure.
  • If the sticker has been on the surface for a long time, you may need to repeat the removal process multiple times.
  • To prevent residue from sticking to the surface again, clean the area thoroughly with a mild soap solution.

Conclusion

Removing stickers with residue can be a challenge, but by following these step-by-step guides and using the right tools and techniques, you can successfully remove even the most stubborn stickers. Whether you’re dealing with an old sticker on your laptop or a new one on your car, remember to be patient and gentle, as excessive force or harsh chemicals can damage the surface. Happy sticker removal!

How do I get the back off this type of sticker?

Share This Article
13
0
Would love your thoughts, please comment.x
()
x