How to remove old kitchen sink faucet under sink?

How to Remove an Old Kitchen Sink Faucet Under the Sink

Removing an old kitchen sink faucet under the sink can be a challenging task, but with the right steps and some basic tools, it can be done successfully. Here’s a step-by-step guide to help you remove your old kitchen sink faucet under the sink.

Preparation is Key

Before starting the removal process, take some time to prepare yourself and your workspace. Here are a few things to consider:

• Turn off the water supply: Locate the shut-off valves under the sink and turn them clockwise to shut off the water supply to the faucet. Open the faucet to drain the water from the pipes.
• Clear the area: Move any items from under the sink to create a clear workspace. You don’t want to damage any surrounding pipes, nor do you want to make it difficult to work in the tight space.
• Gather necessary tools: You’ll need a few tools to complete this task, including a wrench or pliers, a screwdriver, and a channel-type pliers (if you have them).
• Take photos or make a diagram: Take photos or draw a diagram of the faucet’s connections and any other relevant details. This will help you remember how to reassemble the new faucet later.

Step 1: Disconnect the Water Supply Lines

The first step is to disconnect the water supply lines from the faucet. You’ll typically find these lines attached to the faucet’s hot and cold water inlets. Here’s how to remove them:

1. Use a wrench or pliers to loosen the nut that secures the water supply line to the faucet. Turn the nut counterclockwise to loosen it.
2. Once loose, use your hands or pliers to lift the water supply line off the faucet. Start with one line at a time, working from the hot side to the cold side.
3. Repeat the process for the second water supply line.

Step 2: Remove the Mounting Nuts

The next step is to remove the mounting nuts that held the faucet in place. These nuts are usually located on the underside of the sink or on the countertop. Here’s how to remove them:

1. Use a screwdriver to loosen the mounting nut. You may need to use a bit of elbow grease to loosen it, as it’s likely been in place for years.
2. Once loose, use your fingers or a flathead screwdriver to lift the mounting nut out from under the sink.

Step 3: Remove the Faucet

With the water supply lines and mounting nuts removed, the faucet should now be free from any fixed connections. Here’s how to remove it:

1. Gently lift the faucet out from under the sink. You may need to wobble it back and forth slightly to dislodge it from any remaining tabs or clips.
2. Once removed, set the faucet aside, and take a moment to admire your handiwork!

Step 4: Clean Up

Take a moment to clean up any debris or water that may have accumulated under the sink. This will make it easier to install your new faucet and ensure a smooth installation process.

Step 5: Install Your New Faucet (Optional)

If you’re installing a new faucet, now is the time to do so. Simply follow the manufacturer’s instructions for installation, and make sure to secure the faucet in place using the mounting nuts you removed earlier.

Conclusion

Removing an old kitchen sink faucet under the sink can be a challenging task, but with these steps, you should be able to do it successfully. Remember to turn off the water supply, clear the area, gather necessary tools, and take photos or make a diagram to aid in reassembly later. With patience and a bit of elbow grease, you’ll be able to remove your old faucet and install a new one in no time. Happy DIY-ing!