Leveling the Playing Field: Tips for Achieving Perfect Table Height with OLOV Legs
Are you frustrated with your table’s uneven legs? You’re not alone! Many of us have struggled to get our tables to sit level, only to find that the OLOV (Offset-Lower-Offset-Virtual) legs we thought would solve the problem are actually causing more issues. If you’re finding that adjusting the OLOV legs results in either too much height or too little, you’re in the right place. In this article, we’ll provide some helpful tips to help you achieve the perfect table height and get your left and right tables level.
Understanding OLOV Legs
Before we dive into the tips, it’s essential to understand how OLOV legs work. OLOV legs are designed to provide stability and levelness to your table by adjusting the height of each leg independently. The offset design allows you to lower one leg while raising the other, creating a virtual leveling system. However, this design can also lead to confusion and frustration if not used correctly.
Common Mistakes to Avoid
Before we get to the tips, let’s quickly cover some common mistakes to avoid when adjusting OLOV legs:
- Not checking the table’s overall height before adjusting the legs. Make sure to measure the table’s height at multiple points to ensure accuracy.
- Adjusting the legs in small increments. Instead, make larger adjustments and check the table’s levelness before making further adjustments.
- Not accounting for the table’s material thickness. If your table has a thick top or base, you may need to adjust the legs accordingly.
Tips for Achieving Perfect Table Height
Now that we’ve covered the basics, here are some tips to help you achieve the perfect table height with OLOV legs:
- Measure, Measure, Measure: Take precise measurements of the table’s height at multiple points to ensure accuracy. Use a level and a tape measure to check the table’s levelness.
- Adjust the Legs in Large Increments: Instead of making small adjustments, try adjusting the legs in larger increments (e.g., 1/4 inch) and checking the table’s levelness before making further adjustments.
- Account for Material Thickness: Don’t forget to account for the table’s material thickness when adjusting the legs. This will help ensure a more accurate adjustment.
- Check the Legs’ Position: Make sure the OLOV legs are positioned correctly. Check that the offset legs are at the correct angle and that the virtual legs are aligned properly.
- Use a Laser Level: If you’re still having trouble, consider using a laser level to ensure the table is perfectly level. This can be especially helpful if you’re dealing with a large or complex table.
- Consult the Manufacturer’s Instructions: If you’re still struggling, consult the manufacturer’s instructions for specific guidance on adjusting the OLOV legs. They may have specific recommendations or tips that can help.
Conclusion
Achieving the perfect table height with OLOV legs can be a challenge, but with the right tips and techniques, you can get your table level and stable. By measuring carefully, adjusting in large increments, accounting for material thickness, checking the legs’ position, using a laser level, and consulting the manufacturer’s instructions, you’ll be well on your way to creating a level and stable table. Remember to take your time and be patient – with practice, you’ll be a pro at leveling your tables in no time!
I’m trying to get the left table level with the right, but when I adjust the OLOV legs, it’s either too high or too low. Any tips?
Shim. Is the floor level?
Give up and get on ocd meds, it’s so much more relaxing
If they’re always going to be next to each other get a couple mending plates and attach them together on the underside.
You need to level one table at the height you want. The level the 2nd table to the first. You will probably need to adjust the leg lengths, hope that have adjusters.
Could be variation in the table top(ie not completely flat). Would never get it perfect then and will drive you nuts trying.
These tables go out of level so easily because of people leaning on them.
That looks like maybe 1 – 1.5 mm difference, are you setting up for a science experiment that has to have a perfectly level base? The thickness of the tablecloth will mask the difference.